Aspen Multi-Position Hydronic Air Handler, 120 V, 5.8 A, 7.53 A Minimum Circuit, 60 Hz, 1 ph Phase, 3 ton Nominal Capacity, Output BTU Rating: 36000 Btu/hr, 15 A Circuit Breaker, PSC Blower Motor, 1/3 hp Motor HP, 4 Hot Water Coil Rows, Copper Coil, Horizontal Right, Upflow, Electronic Control Board, Steel Housing, Galvanized Housing, 21 in Length, 20-1/2 in Width, 49-1/4 in Height, Additional Information: R-454B Refrigerant, Without Pump
Additional InformationR-454B Refrigerant, Without Pump
Amperage Rating5.8 A
Blower Motor TypePSC
Circuit Breaker Size15 A
Coil MaterialCopper
ConfigurationHorizontal Right, Upflow
Control BoardElectronic
Frequency Rating60 Hz
Height49-1/4 in
Hot Water Coil Rows4
Housing FinishGalvanized
Housing MaterialSteel
Length21 in
Minimum Circuit Amperage7.53 A
Motor HP Rating1/3 hp
Nominal Capacity3 ton
Output BTU Rating36000 Btu/hr
Phase1 ph
Voltage Rating120 V
Width20-1/2 in
Upflow or horizontal right as shipped (field-convertible for downflow or horizontal left applications). Can be AHRI matched with most brands of air conditioners or heat pumps.
A2L refrigerants require a Refrigerant Detection System (RDS) for compliance. In accordance to UL 60335 Refrigerant Detection Systems are factory-installed on A2L refrigerant ready air handlers.
ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS).
Less than 2% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to Aspen installation instructions. Sturdy, fully insulated galvanized steel cabinet with knockout for duct return.
Direct drive multi-speed blowers circulate air quietly and efficiently. Multiple motor speeds allow for precise air volume selection. Motor speeds can be easily selected via motor terminals. Blowers mounted on rails so they can be easily removed for service.
An electronic board controls the functioning of the system reducing moving parts. The board provides for various hot water supply source connections and the blower time delay to maximize heat/cool extraction. As an enhanced feature the pump circulates hot water every 6 hours to prevent water stagnation