Samsung AJ012DNHDCG/AA JNG12HDD

Brand: Samsung SKU: AJ012DNHDCG/AA

Price:
Add To Cart
Local Stock:

Manuals(3)

Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_CNG09LDD_Instruction_Installation_Manual.pdf
Owners/User Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_CNG09LDD_Owners_User_Manual.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AJ012DNHDCG_AA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung Multi-Split Indoor Unit, 208 to 230 V, 2.1 A, 153 W, 60 Hz, 1 ph, 12000 Btu/hr Cooling, 14000 Btu/hr Heating, 516 cfm, Pipe Connection, R-32 Refrigerant, 31 dBA Sound Level, Steel, Finish: Galvanized, 33-7/16 in Overall Length, 9-13/16 in Overall Width, 27-9/16 in Overall Height

Amperage Rating 2.1 A

BTU Rating 12000 Btu/hr Cooling, 14000 Btu/hr Heating

CFM Rating 516 cfm

Connection Type Pipe

Finish Galvanized

Frequency Rating 60 Hz

Material Steel

Overall Height 27-9/16 in

Overall Length 33-7/16 in

Overall Width 9-13/16 in

Phase 1 ph

Power Rating 153 W

Refrigerant Type R-32

Sound Level 31 dBA

Voltage Rating 208 to 230 V

The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch that disables indoor in the event of condensate overflow.
The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app.
The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire.
Insulated, galvanized steel.
The heat exchanger shall be mechanically bonded aluminum fin to copper tube.
Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit.
The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection when the optional refrigerant leak detector is installed and configured (leak detector and MIM-B14U accessories are required). Indoor Fan
Smart pressure control feature that adjusts fan speed based on ESP delivering consistent heating and cooling power
The indoor unit shall have a smart-tuning function that can provide optimized comfort by allowing the occupant to offset the fan CFM curve to increase or decrease airflow.
The indoor unit shall have automatic air volume scanning for simple setup and optimized comfort settings for the occupant Controls
Control wiring shall be 2 X 16 AWG wire.
The unit shall be operated via a wireless or wired remote control with DDC type signal.
Dual set temperature support when connected to supported controllers.
Wired or wireless controllers must be purchased separately
External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat (MIM-B14U accessory required).
External heat control configuration settings include outside ambient external heat lockout, outside ambient compressor lockout, and time delay options (MIM-B14U accessory required).
Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating (MIM-B14U accessory required).
External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat
Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating

Samsung AJ012DNHDCG/AA

Samsung AJ012DNHDCG/AA JNG12HDD

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription