Samsung Slim Duct Multi-Split Indoor Unit, 208-230 V, 1.06 A, 120 W, 60 Hz, 1 ph Phase, 3 Fan Speeds, 12000 Btu/hr, 456 cfm, Flared Connection, R-32 Refrigerant, Tonnage: 1 ton, 34 dBA Sound Level, Steel, 64 to 90 deg F, 17-5/16 in Overall Length, 35-7/16 in Overall Width, 7-13/16 in Overall Height, For Use With: FJM Multi-Zone Systems
Amperage Rating1.06 A
BTU Rating12000 Btu/hr
CFM Rating456 cfm
Connection TypeFlared
Frequency Rating60 Hz
MaterialSteel
Number of Fan Speeds3
Overall Height7-13/16 in
Overall Length17-5/16 in
Overall Width35-7/16 in
Phase1 ph
Power Rating120 W
Refrigerant TypeR-32
Sound Level34 dBA
Suitable For Use WithFJM Multi-Zone Systems
Temperature Rating64 to 90 deg F
Tonnage1 ton
Voltage Rating208-230 V
The system shall provide high heating capacity at -4°F (-20°C) with heating operation down to -13°F (-25°C)
The outdoor unit shall have a base pan heater as standard for optimal defrost cycle water drainage
The indoor unit shall have an integral condensate pump with maximum 29” lift from bottom of the unit with check valve and float switch that disables indoor in the event of condensate overflow
The system shall feature comfort humidity control. Utilizing an integral humidity sensor, the system optimizes the indoor unit coil temperature according to the dew point, maximizing energy savings while still providing space dehumidification and occupant comfort
The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app
Auto-restart after power loss
Soft-start compressor minimizing current inrush
The outdoor unit shall provide 208/230V power to the indoor unit via 14 AWG X 3 interconnect power cable
Outdoor unit shall be galvanized steel with a baked-on powder coated finish for durability
Indoor unit: Insulated, galvanized steel
All heat exchangers shall be mechanically bonded aluminum fin to copper tube
The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire
The system shall utilize low-GWP R-32 refrigerant
Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit
The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection when the optional refrigerant leak detector is installed and configured (leak detector and MIM-B14U accessories are required)