Samsung AM007FEVDCG/AA AM007FEVDCG/AA

Brand: Samsung SKU: AM007FEVDCG/AA

Price:
Add To Cart
Local Stock:

Manuals(3)

Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FEVDCGAA_Instruction_Installation_Manual.pdf
Owners/User Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FEVDCGAA_Owners_User_Manual.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FEVDCGAA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung High Wall Indoor Unit, DVM S Series, Model: AM007FEV, 208-230 V, 0.2 A, 24 W, 60 Hz, 1 ph Phase, 3 Fan Speeds, 7500 Btu/hr Cooling, 8500 Btu/hr Heating, 201 cfm, Connection Type: Flared, 15 A Fuse Rating, 34 dBA Sound Level, Wall Mounting, HIPS, 32-1/2 in Overall Length, 8-1/2 in Overall Width, 11-13/16 in Overall Height, Additional Information: R-32 Refrigerant

Additional Information R-32 Refrigerant

Amperage Rating 0.2 A

BTU Rating 7500 Btu/hr Cooling, 8500 Btu/hr Heating

CFM Rating 201 cfm

Connection Type Flared

Frequency Rating 60 Hz

Fuse Rating 15 A

Material HIPS

Model AM007FEV

Mounting Type Wall

Number of Fan Speeds 3

Overall Height 11-13/16 in

Overall Length 32-1/2 in

Overall Width 8-1/2 in

Phase 1 ph

Power Rating 24 W

Series DVM S Series

Sound Level 34 dBA

Voltage Rating 208-230 V

Compatible with R-32 DVM S2+, DVM S+ Water, and DVM S Mini systems
The indoor unit shall feature WindFree™* mode. When activated in cooling mode the unit will close its louver and will disperse air into the space through thousands of micro-holes on the front of the indoor unit preventing cold air drafts on occupants.
The indoor unit shall have integral Wi-Fi capability as standard to allow control and monitoring using the Samsung SmartThings app.
The indoor unit chassis shall be UL94 V0 with a galvanized steel mounting bracket
The indoor unit shall have easy access to wire, pipe, and drain connections via the access panel on the bottom of the unit for simple installation and service
The heat exchanger shall be mechanically bonded fin to copper tube
Refrigerant flow shall be controlled by an electronic expansion valve at the indoor unit
The indoor unit shall include an R32 alarm output plug for simple notification or interlock of third-party equipment upon R32 leak detection (MIM-B14U accessory required).
The indoor fan shall be a single, antibacterial cross-flow type
Three fan speeds and auto settings
Automatic (motorized) vertical swing (up/down) and horizontal swing (left/right) louvers
Control wiring shall be 2 X 16 AWG.
The unit shall be operated via a wired remote controller model MWRWG01UN, purchased separately.
Dual set temperature support when connected to supported wired controllers.
The indoor unit shall have a simple connection for condensate overflow detection devices or any normally closed contact for simple unit shutdown.
7-segment digital display on the front of the unit to display temperature and unit status
Washable main filter as standard accessible from the top of the unit
Emergency Temperature Output (ETO) function: when indoor unit is in error status or when room temperature exceeds a configurable temperature level, the system outputs a signal to an external source (e.g., backup system, building management system, alert device like status light, warning lamp, or buzzer).

Samsung AM007FEVDCG/AA

Samsung AM007FEVDCG/AA AM007FEVDCG/AA

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription