Samsung AC012DXSCCG/AA CXG12SCD

Brand: Samsung SKU: AC012DXSCCG/AA

Price:
Add To Cart
Local Stock:

Manuals(2)

Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AC009DXSCCG_AA_Instruction_Installation_Manual.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AC012DXSCCG_AA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung Single Zone Heat Pump Split System Outdoor Unit, Duct S Series, 208 to 230 V, 9.8 A, 153 W, 60 Hz, 1 ph, 14000 Btu/hr Heating, 12000 Btu/hr Cooling, 516 cfm Heating CFM Rating, 516 cfm Cooling CFM Rating, 11.7 EER Rating, 18.6 SEER, 9.5 HSPF, Pipe Connection, Inverter Driven, Twin BLDC Rotary Compressor, R-32 Refrigerant, 54 dB Heating Sound Level, 54 dB Cooling Sound Level, Steel, Finish: Galvanized/Powder-Coated, -13 to 75 deg F Heating Operating Temperature, 0 to 122 deg F Cooling Operating Temperature, 31-1/8 in Overall Length, 11-3/16 in Overall Width, 21-5/8 in Overall Height

Amperage Rating 9.8 A

Compressor Type Inverter Driven, Twin BLDC Rotary

Connection Type Pipe

Cooling BTU Rating 12000 Btu/hr

Cooling CFM Rating 516 cfm

Cooling Operating Temperature 0 to 122 deg F

Cooling Sound Level 54 dB

EER Rating 11.7

Finish Galvanized/Powder-Coated

Frequency Rating 60 Hz

HSPF Rating 9.5

Heating BTU Rating 14000 Btu/hr

Heating CFM Rating 516 cfm

Heating Operating Temperature -13 to 75 deg F

Heating Sound Level 54 dB

Material Steel

Overall Height 21-5/8 in

Overall Length 31-1/8 in

Overall Width 11-3/16 in

Phase 1 ph

Power Rating 153 W

Refrigerant Type R-32

SEER Rating 18.6

Series Duct S Series

Voltage Rating 208 to 230 V

The system shall provide high heating capacity at -4degF (-20degC) with heating operation down to -13degF (-25degC).
The outdoor unit shall have a base pan heater as standard for optimal defrost cycle water drainage.
The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch that disables indoor in the event of condensate overflow.
The system shall feature comfort humidity control. Utilizing an integral humidity sensor, the system optimizes the indoor unit coil temperature according to the dew point, maximizing energy savings while still providing space dehumidification and occupant comfort.
The system shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app.
Auto-restart after power loss
Soft-start compressor minimizing current inrush
The outdoor unit shall provide 208/230V power to the indoor unit via 14 AWG X 3 interconnect power cable.
Outdoor unit: Galvanized steel with a baked-on powder coated finish for durability.
Indoor unit: Insulated, galvanized steel.
All heat exchangers shall be mechanically bonded aluminum fin to copper tube.
The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire.
The system shall utilize low-GWP R-32 refrigerant
Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit.
The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection when the optional refrigerant leak detector is installed and configured (leak detector and MIM-B14U accessories are required).
Smart pressure control feature that adjusts fan speed based on ESP delivering consistent heating and cooling power
The indoor unit shall have a smart-tuning function that can provide optimized comfort by allowing the occupant to offset the fan CFM curve to increase or decrease airflow.
The indoor unit shall have automatic air volume scanning for simple setup and optimized comfort settings for the occupant
Control wiring shall be 2 X 16 AWG wire.
No additional interface modules/adapters are required when connecting to Samsung central control options.

Samsung AC012DXSCCG/AA

Samsung AC012DXSCCG/AA CXG12SCD

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription