Samsung AC009DXSCCG/AA CXG09SCD

Brand: Samsung SKU: AC009DXSCCG/AA

Price:
Add To Cart
Local Stock:

Manuals(2)

Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AC009DXSCCG_AA_Instruction_Installation_Manual.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AC009DXSCCG_AA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung Heat Pump Split System, WindFree Series, 208 to 230 V, 9.5 A, 27 W, 60 Hz, 1 ph, 3 Fan Speeds, 9000 Btu/hr Cooling, 12000 Btu/hr Heating, 258 cfm, 13.8 EER Rating, 22.1 SEER, 9.5 HSPF, Pipe Connection, R-32 Refrigerant, 53 dBA Sound Level, Steel, Finish: Galvanized/Powder-Coated, 0 to 122 deg F Cooling, -13 to 75 deg F Heating, 31-1/8 in Overall Length, 11-3/16 in Overall Width, 21-5/8 in Overall Height

Amperage Rating 9.5 A

BTU Rating 9000 Btu/hr Cooling, 12000 Btu/hr Heating

CFM Rating 258 cfm

Connection Type Pipe

EER Rating 13.8

Finish Galvanized/Powder-Coated

Frequency Rating 60 Hz

HSPF Rating 9.5

Material Steel

Number of Fan Speeds 3

Overall Height 21-5/8 in

Overall Length 31-1/8 in

Overall Width 11-3/16 in

Phase 1 ph

Power Rating 27 W

Refrigerant Type R-32

SEER Rating 22.1

Series WindFree Series

Sound Level 53 dBA

Temperature Rating 0 to 122 deg F Cooling, -13 to 75 deg F Heating

Voltage Rating 208 to 230 V

The system shall provide high heating capacity at -4degF (-20degC) with heating operation down to -13degF (-25degC).
The outdoor unit shall have a base pan heater as standard for optimal defrost cycle water drainage.
The indoor unit shall feature WindFree™* mode. When activated in cooling mode, the unit will close its louver and will disperse air into the space through thousands of micro-holes on the front of the indoor unit, preventing cold air drafts on occupants.
The system shall feature comfort humidity control. Utilizing an integral humidity sensor, the system optimizes the indoor unit coil temperature according to the dew point, maximizing energy savings while still providing space dehumidification and occupant comfort.
The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch to disable unit in the event of condensate overflow.
The indoor unit fascia panel shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app.
Auto-restart after power loss
Soft-start compressor minimizing inrush current
The outdoor unit shall provide 208/230V power to the indoor unit via 14 AWG X 3 interconnect power cable.
Outdoor unit: Galvanized steel with a baked-on powder coated finish for durability.
Indoor unit: Insulated, galvanized steel.
All heat exchangers shall be mechanically bonded aluminum fin to copper tube.
The outdoor unit shall supply power to indoor unit via 14 AWG X 3 power wire.
The system shall utilize low-GWP R-32 refrigerant
Refrigerant flow shall be controlled by electronic an expansion valve at the outdoor unit.
The system shall include an R32 alarm output plug on the indoor unit and outdoor unit for notification of R32 leak detection when the optional refrigerant leak detector is installed and configured (leak detector and MIM-B14U accessories are required).
Smart pressure control feature that adjusts fan speed based on ESP delivering consistent heating and cooling power
The indoor unit shall have a smart-tuning function that can provide optimized comfort by allowing the occupant to offset the fan CFM curve to increase or decrease airflow.
The indoor unit shall have automatic air volume scanning for simple setup and optimized comfort settings for the occupant

Samsung AC009DXSCCG/AA

Samsung AC009DXSCCG/AA CXG09SCD

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription