Samsung AM012FELDCG/AA AM012FELDCG/AA

Brand: Samsung SKU: AM012FELDCG/AA

Price:
Add To Cart
Local Stock:

Manuals(4)

Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FELDCGAA_Catalog.pdf
Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FELDCGAA_Instruction_Installation_Manual.pdf
Owners/User Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM007FELDCGAA_Owners_User_Manual.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM012FELDCGAA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung Low Static Slim Ducted Indoor Unit, DVM Series, Model: AM012FEL, 208-230 V, 0.73 A, 50 W, 60 Hz, 1 ph Phase, 3 Fan Speeds, 12000 Btu/hr Cooling, 13500 Btu/hr Heating, 512 cfm, Connection Type: Flared, R-32 Refrigerant, 15 A Fuse Rating, 29 dBA Sound Level, Steel, Galvanized, 43-5/16 in Overall Length, 17-5/16 in Overall Width, 7-13/16 in Overall Height, Additional Information: 1/4 in Liquid Line, 1/2 in Suction Line

Additional Information 1/4 in Liquid Line, 1/2 in Suction Line

Amperage Rating 0.73 A

BTU Rating 12000 Btu/hr Cooling, 13500 Btu/hr Heating

CFM Rating 512 cfm

Connection Type Flared

Finish Galvanized

Frequency Rating 60 Hz

Fuse Rating 15 A

Material Steel

Model AM012FEL

Number of Fan Speeds 3

Overall Height 7-13/16 in

Overall Length 43-5/16 in

Overall Width 17-5/16 in

Phase 1 ph

Power Rating 50 W

Refrigerant Type R-32

Series DVM Series

Sound Level 29 dBA

Voltage Rating 208-230 V

Compatible with R-32 DVM S2+, DVM S+ Water, and DVM S Mini systems
The indoor unit shall have an integral condensate pump with maximum 29" lift from bottom of the unit with check valve and float switch that disables indoor in the event of condensate overflow.
The indoor unit shall have a built-in Wi-Fi adapter as standard to allow control and monitoring using the Samsung SmartThings app.
Insulated, galvanized steel.
The heat exchanger shall be mechanically bonded aluminum fin to copper tube.
Refrigerant flow shall be controlled by electronic expansion valve at the indoor unit.
The indoor unit shall include an R32 alarm output plug for simple notification or interlock of third-party equipment upon R32 leak detection (MIM-B14U accessory required).
Three fan speeds and auto setting
Control wiring shall be 2 X 16 AWG wire.
The unit shall be operated via a wired remote controller model MWRWG01UN, purchased separately.
Dual set temperature support when connected to supported controllers.
Wired or wireless controllers must be purchased separately.
External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat (MIM-B14U accessory required).
External heat control configuration settings include outside ambient external heat lockout, outside ambient compressor lockout, and time delay options (MIM-B14U accessory required).
Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating (MIM-B14U accessory required).
External heat control functionality allows for configuration of fan operation during auxiliary heat operation, defrost, and emergency heat
Emergency heat functionality allows the system to continue controlling the external heat source even when system errors prevent the heat pump from operating
Emergency Temperature Output (ETO) function: when indoor unit is in error status or when room temperature exceeds configurable temperature level, the system outputs a signal to an external source, e.g., backup system, building management system, alert device (ex: status light, warning lamp, buzzer).

Samsung AM012FELDCG/AA

Samsung AM012FELDCG/AA AM012FELDCG/AA

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription