Samsung AM120BXVGFH/AA AM120BXVGFH/AA

Brand: Samsung SKU: AM120BXVGFH/AA

Price:
Add To Cart
Local Stock:

Manuals(3)

Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM072BXVGJR_AA_Instruction_Installation_Manual.pdf
Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM096BXVGFH_AA_Specification_Sheet.pdf
Submittal https://assets.unilogcorp.com/267/ITEM/DOC/Samsung_AM120BXVGFH_AA_Submittal.pdf

DESCRIPTION
Specs
FEATURES
Documents

Samsung Heat Pump Condensing Unit, Model: DVM S2, 208 - 230 V, 24.8/26.2 A, 9.2 kW Cooling, 9.7 kW Heating, 60 Hz, 3 ph Phase, 120000 Btu/hr Cooling, 135000 Btu/hr Heating, 9924 cfm, 12, 11.9, 11.8 EER Rating, 22.6, 23.95, 25.3 IEER, (2) Inverter Scroll Compressor, R-410A Refrigerant, 1/2 in Liquid Line, 1-1/8 in Suction Line, Tonnage: 10 ton, 57 dBA Sound Level, Steel, Finish: Galvanized Powder-Coated, 5 to 122 deg F Cooling, -22 to 75 deg F Heating, 66-3/4 in H x 51 in W x 30-1/8 in D

Amperage Rating 24.8/26.2 A

BTU Rating 120000 Btu/hr Cooling, 135000 Btu/hr Heating

CFM Rating 9924 cfm

Compressor Type (2) Inverter Scroll

Dimensions 66-3/4 in H x 51 in W x 30-1/8 in D

EER Rating 12, 11.9, 11.8

Finish Galvanized Powder-Coated

Frequency Rating 60 Hz

IEER Rating 22.6, 23.95, 25.3

Liquid Line Size 1/2 in

Material Steel

Model DVM S2

Phase 3 ph

Power Rating 9.2 kW Cooling, 9.7 kW Heating

Refrigerant Type R-410A

Sound Level 57 dBA

Suction Line Size 1-1/8 in

Temperature Rating 5 to 122 deg F Cooling, -22 to 75 deg F Heating

Tonnage 10 ton

Voltage Rating 208 - 230 V

Construction - The unit shall be galvanized steel with a baked on powder coated finish
Refrigerant System - The compressors shall be hermetically sealed, inverter driven, direct flash injected, DC scroll type with soft-start capability manufactured by Samsung. The compressor(s) shall feature an asymmetrical scroll design with rotating compressor operation/priority (where applicable). Flash injected compressors provide advanced low ambient heating performance
Heat Exchanger - The heat exchanger shall be mechanically bonded fin to copper tube. The aluminum fins of the heat exchanger shall have a protective coating, Salt spray test method: ASTM-B117-18 - The heat exchanger showed no unusual rust or corrosion development to 3,000 hours
Active Artificial Intelligence - The outdoor unit shall feature Active Artificial Intelligence (AI) shall monitor environmental and system operational data and use Deep Neural Network algorithms to provide optimal system performance and reliability
Controls - The outdoor unit shall have a removable EEPROM that stores unit serial number, startup information, system settings, system tag/name, and other information
Inverter PCB cooling shall be done with liquid refrigerant and air to maintain optimal and safe operating temperatures
The system shall feature advanced oil recovery cycle logic (maximum duration in cool mode: 3 minutes, maximum duration in heat mode: 6 minutes, defrost cycles lasting over 3 minutes are considered oil recovery cycles). Oil recovery operation shall not interrupt heating or cooling operation
The outdoor unit shall feature optional night quiet modes to reduce outdoor unit sound (4 levels) with automatic activation or manual activation (with MIM-B14 accessory)
The outdoor unit shall feature advanced intelligent defrost logic to significantly reduce defrost cycle frequency by monitoring air resistance across the condenser coil during heating operation to determine defrost operation initiation to prevent unnecessary defrost cycles
The outdoor unit shall feature optional snow blowing logic to prevent snow accumulation on idle outdoor units
The outdoor unit shall feature maximum current control settings to limit current (50% - 100% of design current) adjustable at outdoor unit, supported central controls, and supported indoor unit wired controllers

Samsung AM120BXVGFH/AA

Samsung AM120BXVGFH/AA AM120BXVGFH/AA

Recently Viewed Items

Company

Customer Tools

Resources

Policies

Contact Us

Email Subscription