Samsung Heat Recovery Condensing Unit, DVM S2 Series, 16 ton Nominal Capacity, 192000 Btu/hr Cooling, 216000 Btu/hr Heating BTU Rating, 208 - 230 V Voltage Rating, 60 Hz Frequency Rating, 3 ph Phase, Inverter Scroll Compressor Type, 12855 cfm Rating, 11.8 EER Rating, R-410A Refrigerant Type, 5/8 in Liquid Line Size, 1-1/8 in Suction Line Size, 63 dBA Sound Level, 5 to 122 deg F Temperature Rating, Steel, Galvanized, 66-3/4 in H x 73-1/4 in W x 30-1/8 in D Dimensions
Inverter PCB cooling shall be done with liquid refrigerant and air to maintain optimal and safe operating temperatures
The system shall feature advanced oil recovery cycle logic (maximum duration in cool mode: 3 minutes, maximum duration in heat mode: 6 minutes, defrost cycles lasting over 3 minutes are considered oil recovery cycles), Oil recovery operation shall not interrupt heating or cooling operation
The outdoor unit shall feature optional night quiet modes to reduce outdoor unit sound (4 levels) with automatic activation or manual activation (with MIM-B14 accessory)
The outdoor unit shall feature advanced intelligent defrost logic to significantly reduce defrost cycle frequency by monitoring air resistance across the condenser coil during heating operation to determine defrost operation initiation to prevent unnecessary defrost cycles
The outdoor unit shall feature optional snow blowing logic to prevent snow accumulation on idle outdoor units
The outdoor unit shall feature maximum current control settings to limit current (50% - 100% of design current) adjustable at outdoor unit, supported central controls, and supported indoor unit wired controllers
The outdoor unit shall feature energy savings options to reduce system energy consumption when average indoor room temperatures are greater than average indoor set temperatures in heating mode or when average indoor room temperatures are lower than average indoor set temperatures in cooling mode